big07
New Member
Posts: 8
|
Post by big07 on Jul 18, 2006 22:05:04 GMT -5
It said in the half backing instruction that after u cut the back u can fit a Bob Long bolt...does that mean any specific bolt from bob long or just any
|
|
|
|
Post by di$TOrTed on Jul 19, 2006 11:51:44 GMT -5
Hhhmmm, I never did this on my spyder, I don't think the Alias bolts work. I think it's 2k5 timmy bolts etc.
I'll get nick to visit this thread he would know.
|
|
big07
New Member
Posts: 8
|
Post by big07 on Jul 19, 2006 19:21:43 GMT -5
ok thanx u very much
|
|
|
|
Post by nick_reith on Jul 21, 2006 21:15:13 GMT -5
Sorry for the delayed response I have been busy lately. You can't use the newer timmy bolts. Like the alias bolts or the gen 4 bolts but the gen 3's or earlier and you will be fine. I use 2k2 timmy bolts in all my markers. This is the one I am using in my spyder imagine. store.paintballace.com/chitinfufobo1.html |
|
big07
New Member
Posts: 8
|
Post by big07 on Jul 21, 2006 21:53:55 GMT -5
ok thanx i just wanted to know cuz im thinking about doing that, so do u know were i can get the gen 3??
|
|
|
|
Post by nick_reith on Jul 23, 2006 23:08:34 GMT -5
Just www.froogle.com for 2k2 Timmy bolts. There are a ton of them the one I linked above is a nice one. |
|
|
|
Post by podhead on Sept 1, 2006 22:07:19 GMT -5
Nick that same bolt you are using in your imagine will that work if your gun is not set up for LP. (Also I did the half back on my imagine.) If so would I also need a new striker. Thanks!!
|
|
|
|
Post by di$TOrTed on Sept 3, 2006 14:54:45 GMT -5
It will work fine if your gun is LP or not.
|
|
big07
New Member
Posts: 8
|
Post by big07 on Sept 3, 2006 23:04:10 GMT -5
cant beleive this thread is back alive after like 4 months and, what tools/power tools can i half-back my gun with??
|
|
|
|
Post by podhead on Sept 4, 2006 14:27:30 GMT -5
I used a dremel that I bought at Wal-Mart for around 45.00 bucks and a hacksaw for like 4.00 bucks.
|
|
big07
New Member
Posts: 8
|
Post by big07 on Sept 4, 2006 17:05:22 GMT -5
ok thanx..cuz im still thinking about doing it but i want to practice first
|
|
